|
|
Build Your Online Product Catalogs?
| Product Name: |
gate groove wheel
|
| Supply Ability: |
|
| Related proudcts |
|
| Specifications |
dimater 40,50.60,70,80,90,100mm |
| Price Term: |
FOB |
| Port of loading: |
Ningbo |
| Minimum Order |
|
| Unit Price: |
|
|
V-groove caster wheels are designed to guide equipment by rolling on inverted angle iron track. Elevated track minimizes problems caused by floor debris. The relief groove at the base of the "V" equalizes the load on each face of the angle. Forged Steel V-groove castor wheels minimize wear of the V-groove sides and are best for frequent operation. When not operating on track, the considerable wheel tread on each side of the V-groove allows for use on smooth floors. It is important that if more than one track is used they are parallel, straight and level. Otherwise V-groove wheels may bind or run up over the track. Tolerance should be within plus or minus 1/64" every 20 feet. Joints between pieces of track should be smooth and well reinforced. V-groove caster wheels are standard with straight roller bearings, which allow only 1/16" total end play (side to side movement). It is desirable when loads are great to use tapered bearings, which have thrust as well as radial capacity. The proper adjustment of tapered bearings prohibits end play.
Available Item: 2-1/2inch, 3inch, 3-1/2inch, 4inch, 5inch, 6inch, etc
You know we can do it by your samples with drawing. And supply the OEM service perfectly
|
| Company: |
Scarlet hardware co***ny
|
| Contact: |
Ms. Avon Chu |
| Address: |
No.90 Jinxi Rd,Jinhua |
| Postcode: |
321000 |
| Tel: |
86 135 15709970 |
| Fax: |
86 135 15709970 |
| E-mail: |
|
|
|
|
Home
